Jallad | 906

906

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 906 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Maximum Gross Power

75.1 HP

Engine Model

Cat C2.8*

Maximum Engine Speed

2550 rpm

DOWNLOAD TECHNICAL SPECIFICATIONS

REQUEST A QUOTE

COMPARE MODELS

Specifications

BENEFITS & FEATURES

MEDIA GALLERY

RELATED ATTACHMENTS

Specification

Value

Maximum Gross Power

75.1 HP

Engine Model

Cat C2.8*

Maximum Engine Speed

2550 rpm

Maximum Gross Power - Rated Engine Speed

2400 r/min

Maximum Gross Power - SAE J1995

75.1 HP

Maximum Gross Power - ISO 14396

74.3 HP

Maximum Gross Power - ISO 14396 (metric)

75.3 mhp

Rated Net Power - Rated Engine Speed

2400 r/min

Rated Net Power - SAE J1349

73 HP

Rated Net Power - ISO 9249

72.1 HP

Rated Net Power - 2,400 rpm - ISO 9249 (metric)

73.1 mhp

Maximum Gross Torque - SAE J1995

222 lb/ft

Maximum Gross Torque - ISO 14396

221 lb/ft

Maximum Net Torque - SAE J1349

218 lb/ft

Maximum Net Torque - ISO 9249

217 lb/ft

Displacement

171 in³

Bore

3.54 in

Stroke

4.33 in

Note

*Equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Note (1)

Maximum gross and net torque measured at 1,600 rpm.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard.

Note (3)

Net power advertised is the power available at the flywheel.

Specification

Value

Operating Weight

12628 lb

Specification

Value

Bucket Capacities

0.75-1.55 m³ (1.0-2.0 yd³)

Bucket Capacities - General Purpose

0.80-1.35 m³ (1.0-1.7 yd³)

Bucket Capacities - Light Material

1.25-1.55 m³ (1.6-2.0 yd³)

Multi-Purpose

0.75-1.1 m³ (1.0-1.4 yd³)

Note

All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.

Note (1)

Bucket capacities stated include BOCE, in line with ISO 7546.

Specification

Value

Fuel Tank

18.5 Gal

Cooling System

3.2 Gal

Engine Crankcase

2.3 Gal

Axles - Front Center Differential

2.3 Gal

Axles - Rear Center Differential

2.3 Gal

Hydraulic System - Including Tank

17.8 Gal

Hydraulic Tank

11.8 Gal

Transmission

0.6 Gal

Note

No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.

Specification

Value

Front

Fixed (standard)

Rear

Fixed (standard)

Note

Oscillation of ±11 degrees via hitch between front and rear frames.

Specification

Value

Steering Articulation Angle - Each Direction

39 °

Maximum Flow - Steering Pump

12.3 gal/min

Maximum Working Pressure - Steering Pump

3336 psi

Steering Cycle Times – (full left to full right) – at High Idle

2.8 s

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.25 turns or 4.00 turns

Specification

Value

Forward and Reverse - Speed Range Creep#

6 mile/h

Forward and Reverse - Speed Range 1*

6 mile/h

Forward and Reverse - Speed Range 2** - High Speed

10.5 mile/h

Forward and Reverse - Speed Range 2** - Standard

12 mile/h

Forward and Reverse - Speed Range 3***

25 mile/h

Note

#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).

Note (1)

*Creep function not available in this gear or above.

Note (2)

**Max speed dependent on model and configuration (standard vs. high speed transmission).

Note (3)

***Reverse is 30 km/h (19 mph).

Specification

Value

Tire Size - Standard

*405/70 R18 SPT9

Tire Size - Optional

405/70 R18 Powerloads

Tire Size - Optional (1)

340/80 R18 XMCL/Bibload

Tire Size - Optional (2)

340/80 R18 TRI 2

Tire Size - Optional (3)

40X14-20 TL, SM/TR

Tire Size - Optional 4

340/80 R18 Duraforce

Note

*This tire has been used for all dimension, stability and performance data.

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Specification

Value

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level II

Note (1)

Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 71 dB(A).

Note (3)

*Measurements were conducted with the cab doors and windows closed.

Note (4)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.

Specification

Value

Main Relief - 1st Auxiliary (3rd slice)

3408 psi

Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*

21 gal/min

Main Relief - 1st Auxiliary (3rd slice) - High Flow*

32 gal/min

Main Relief - 2nd Auxiliary (4th slice)

3408 psi

Main Relief - 2nd Auxiliary (4th slice) - Flow

12 gal/min

Hydraulic Cycle Time - Rackback

2.2 s

Hydraulic Cycle Time - Lift

5 s

Hydraulic Cycle Time - Dump

1.6 s

Hydraulic Cycle Time - Float Down

2.8 s

Note

* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.

Specification

Value

Height: Ground to Cab**

8.08 ft

Height: Ground to Beacon**

8.67 ft

Height: Ground Axle Center**

1.5 ft

Height: Ground Clearance**

0.92 ft

Length: Overall*

17.58 ft

Length: Rear Axle to Bumper

4.5 ft

Length: Hitch to Front Axle

3.5 ft

Length: Wheel Base

7.08 ft

Clearance: Bucket at 45° *

8.17 ft

Clearance: Load over Height**

9.5 ft

Clearance: Level Bucket**

9.92 ft

Height: Bucket Pin**

10.58 ft

Height: Overall**

13.5 ft

Reach: Bucket at 45° *

2.33 ft

Carry Height: Bucket Pin

1 ft

Dig Depth**

0.25 ft

Width: Bucket

6.17 ft

Width: Tread Center

4.58 ft

Turning Radius: Over Bucket

14.42 ft

Width: Over Tires

6 ft

Turning Radius: Outside of Tires

13.08 ft

Turning Radius: Inside of Tires

6.92 ft

Rack Angle at Full Lift

56°

Dump Angle at Full Lift

45°

Rack Angle at Carry

51°

Departure Angle - Degrees

30°

Articulation Angle - Degrees

39°

Operating Weight: Bucket ^

12628 lb

Tipping Load - Straight - ISO 14397-1 †

9756 lb

Tipping Load - Full Turn - ISO 14397-1 †

8157 lb

Operating Weight: Carriage and Tines ^^

12236 lb

Tipping Load - Straight †

7745 lb

80% of Tip: Firm and Level EN474-3 ††

5209 lb

Note (1)

*Vary with bucket

Note (2)

**Vary with tire

Note (3)

^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.

Note (4)

^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).

Note (5)

†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6)

††Full compliance to EN474-3 and SAE J1197.

Note (7)

#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8)

Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines (tire supplier variability can impact dimensions by 2%).

Specification

Value

Height - Ground to Cab

8.08 ft

Height: Ground to Beacon**

8.67 ft

Height: Ground Axle Center**

1.5 ft

Height - Ground Clearance

0.92 ft

Length - Overall with Bucket

18.08 ft

Length: Rear Axle to Bumper

4.5 ft

Length: Hitch to Front Axle

3.5 ft

Length - Wheel Base

7.08 ft

Clearance - Bucket at 45°

7.75 ft

Clearance: Load over Height**

9.5 ft

Clearance - Level Bucket

9.92 ft

Height - Bucket Pin

10.58 ft

Height: Overall**

13.75 ft

Reach - Bucket at 45°

2.67 ft

Carry Height: Bucket Pin

1.08 ft

Dig Depth

0.275 ft

Width - Bucket

6.17 ft

Width - Tread Center

4.58 ft

Turning Radius - Over Bucket

14.67 ft

Width - Over Tires

6 ft

Turning Radius: Outside of Tires

13.08 ft

Turning Radius - Inside Tire

6.92 ft

Rack Angle at Full Lift

50°

Dump Angle at Full Lift

45°

Rack Angle at Carry

46°

Departure Angle - Degrees

30°

Articulation Angle - Degrees

39°

Operating Weight: Bucket ^

12859 lb

Tipping Load – Straight – ISO 14397-1 †

8610 lb

Tipping Load – Full Turn – ISO 14397-1 †

7158 lb

Operating Weight: Carriage and Tines ^^

12430 lb

Tipping Load - Straight †

7357 lb

80% of Tip: Firm and Level EN474-3 ††

4968 lb

Note (1)

*Vary with bucket

Note (2)

**Vary with tire

Note (3)

^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.

Note (4)

^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).

Note (5)

†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6)

††Full compliance to EN474-3 and SAE J1197.

Note (7)

#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8)

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 906 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. Dependent on regional requirements our engines emit equivalent to EU Stage IIIA (U.S. EPA Tier 3) or meets EU Stage V (U.S. EPA Tier 4 Final) with a clean emission module designed to manage itself so you can concentrate on the task at hand.

All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
Digital display with soft touch buttons for customized settings to easily control linkage and drive train to further enhance operator comfort and safety.

Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.
“Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles. New Powertrain (Utility) Mode via the display enables right pedal machine operation giving further improved operator controllability of attachment RPM versus machine ground speed over creep control and inching pedal.

All-in-one joystick to keep eyes on the work while maximizing operation of hydro-mechanical attachments with a state of the art pressure compensated electro-hydraulic system. Optimized Z-bar linkage for great performance and versatility with buckets that now have the DNA of the larger Cat loaders, such as curved side plates and a flat torque tube for parallel reference to the cutting edge.

Work as one with your machine by customizing the controls. Operator can adjust machine responsiveness with the push of a button based on the attachment or application. Once customized, settings can be locked with “simplified mode” to ensure the machine is consistent and intuitive for every user.
Machine security is enhanced with a standard keycode or optional Bluetooth® technology.

Machines can be built to meet industry and application specific needs: Agriculture, General Construction, Industrial and Waste, Landscaping or Snow Removal.
The 906 is availble with the following specific handler arrangements: Ag Handler and Waste Handler

Range of services and aftermarket retrofits and upgrades available to keep your machine going and configured for your application.
Service and maintenance parts available, including a range of self-service options (SSO) and dealer installed kits.
Integrated Technology available to reduce service costs and maintenance.

All

Photos

Videos

360 View