316 GC
If you need reliability, durability, high productivity, and low cost, the Cat® 316 GC is made for you. This excavator is designed, built, and uniquely supported to put you on the fast track to prosperity.
Net Power - ISO 9249
104 HP
Engine Model
C3.6
Net Power - ISO 9249 (DIN)
105 hp (metric)
Specification
Value
Net Power - ISO 9249
104 HP
Engine Model
C3.6
Net Power - ISO 9249 (DIN)
105 hp (metric)
Engine Power - ISO 14396
110 HP
Engine Power - ISO 14396 (DIN)
111 hp (metric)
Bore
4 in
Stroke
5 in
Displacement
220 in³
Biodiesel Capability
Up to B20¹
Emissions
Meets Brazil MAR-1 emission standards equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels** up to 100% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. *For use of blends higher than 20% biodiesel, consult your Cat dealer. **Lower-carbon intensity fuels do not significantly reduce GHGs
Specification
Value
Main System - Maximum Flow
268 L/min (71 gal/min)
Maximum Pressure - Equipment
5076 psi
Maximum Pressure - Travel
5076 psi
Maximum Pressure - Swing
3756 psi
Boom Cylinder - Bore
4 in
Boom Cylinder - Stroke
40 in
Stick Cylinder - Stroke
47 in
Bucket Cylinder - Stroke
37 in
Stick Cylinder - Bore
5 in
Bucket Cylinder - Bore
4 in
Specification
Value
Swing Speed
11.5 r/min
Maximum Swing Torque
31634 ft·lbf
Specification
Value
Operating Weight
32200 lb
Specification
Value
Fuel Tank Capacity
62.6 gal (US)
Cooling System
2.9 gal (US)
Engine Oil
2.9 gal (US)
Final Drive - Each
0.8 gal (US)
Hydraulic System - Including Tank
38.3 gal (US)
Hydraulic Tank
20.3 gal (US)
Specification
Value
Boom
HD 4.65 m (15'3")
Stick
HD 2.5 m (8'2")
Bucket
GD 0.65 m³) (0.85 yd³)
Shipping Height - Top of Cab
9.1 ft
Handrail Height
9.3 ft
Shipping Length
25.8 ft
Tail Swing Radius
7.8 ft
Counterweight Clearance
2.9 ft
Ground Clearance
1.4 ft
Track Length
12.3 ft
Length to Center of Rollers
9.9 ft
Track Gauge
6.5 ft
Transport Width
8.2 ft
Length - Center of Rollers
10 ft
Specification
Value
Maximum Digging Depth
18.1 ft
Boom
HD 4.65 m (15'3")
Stick
HD 2.5 m (8'2")
Bucket
GD 0.65 m³) (0.85 yd³)
Maximum Reach at Ground Level
26.8 ft
Maximum Cutting Height
27.9 ft
Maximum Loading Height
20 ft
Minimum Loading Height
6.6 ft
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom
17.5 ft
Maximum Vertical Wall Digging Depth
15.9 ft
Bucket Digging Force - ISO
24500 lbf
Stick Digging Force - ISO
16860 lbf
Specification
Value
Operating Weight
31600 lb
- Cab Monitor Improvements.
- Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
- Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.
- A notification center keeps important information visible to the operator, and displays messages without shrinking the camera view.
- Color coded notifications set critical messages apart from the rest.
- Use the in-monitor QR code to learn about machine and technology features through a full suite of “how-to”videos.
- The redesigned 316 GC allows you to be up to 15% more productive than with the previous 313D2 GC model.
- The C3.6 engine delivers more power, is more fuel-efficient, and meets U.S. EPA Tier 3 and EU Stage IIIA emission standards,
equivalent to China Nonroad Stage III. - Breakout force is increased and a redesigned swing drive gives you improved swing torque and smoothness, increasing your productivity.
- The main hydraulic pump is electronically controlled for greater efficiency and provides nearly twice the fluid flow of the previous model, improving control and productivity.
- Undercarriage and track design better meet high production needs and deliver excellent stability.
- A reinforced upper frame gives the 316 GC even greater durability.
- A wide range of bucket and tool options lets you take on more tasks.
- Reinforced bucket linkage pin allows for greater digging force.
- Reinforced stick with tailor-made rebar makes the 316 GC reliable enough to handle any tough application.
- Match the power to the job with three working modes: Smart for power automatically adjusted to demand, Eco for lowest fuel burn, and Power for highest productivity.
- The 316 GC is designed for easier and less expensive maintenance, lowering costs up to 20%.
- Hydraulic and air filters have increased service life, while the pilot and case drain filters have been eliminated.
- Most daily maintenance can be performed from ground level, decreasing the amount of time you spend on daily tasks.
- Swing drive operates on the hydraulic system, eliminating the need to check or refill a different oil system.
- Both the hydraulic and engine oil refill amounts have been reduced with no change in performance or service life.
- When hydraulic demand is low, the Automatic Engine Control (AEC) system reduces RPM, lowering your fuel costs.
- Cat Product Link™ comes standard so you can remotely monitor fuel consumption, machine health, location, and hours on demand through VisionLink®.
- Start the engine with a pushbutton.
- One-button sticks (with adjustable joystick response and gain) make control easy for any operator.
- Navigate quickly through simplified control menus on the high-resolution 203 mm (8 in) touchscreen monitor.
- Easily move soft, wet, and sticky material with a new, optional shallow profile bucket.
- Cat continues to improve user interface functionality for operators of all skill levels. The touchscreen monitor is an easy-to-use operating tool that presents the jobsite dashboard with an intuitive format. Productivity applications are displayed in grid-view to read on-the-go, and touchscreen navigation is programmed to make sure job performance continues without any hold ups.
- Wide seat (larger than previous models) adjusts for operators of all sizes.
- Standard automatic climate control keeps you at the right temperature all shift long.
- Convenience features include a radio, headphone port, and a USB port for connecting and charging devices.
- Cup holder and storage space forward of the controls can hold large cups and wide cell phones; storage behind the seat can hold a hard hat, large lunchbox, and other items.
- Nearly all major mechanical components are accessed from the ground or the service platform.
- Radiator screens can be removed easily, are simple to clean, and keep the radiators free of small debris that can be difficult to remove, such as grass clippings.
- Engine compartment is easily accessed from the service platform; fluid caps and gauges are easily reached, and an automatic tensioner ensures you will never need to make belt adjustments.
- Cat technology helps you monitor your machine, and the Caterpillar service network helps you maximize uptime.
- Emergency engine and electrical shut offs are also at ground level.
- Handrails meet ISO 2867:2011 requirements; steps and platforms use anti-skid plates with countersunk bolts to help prevent slipping and tripping.
- Operator can exit in an emergency through either the rear window or the steel top hatch.
- An updated cab has larger windows and smaller cab posts, providing excellent visibility into the trench and in every direction.
- Bright exterior LED lights and an optional rearview camera ensure you have total visibility on the jobsite.
- Enhance jobsite safety. Add a swing alarm to alert people when you're rotating from trench to stockpile and back again.
CVP75
G313 GC Demolition & Sorting Grapple: 587-8718
G313 GC Demolition & Sorting Grapple: 587-8719
G314 Demolition & Sorting Grapple: 587-8963
H110 S
H115 S
S3015 Rotating Scrap & Demolition Shear
S3025 Rotating Scrap & Demolition Shear
G312 GC Demolition & Sorting Grapple: 587-8713
G312 GC Demolition & Sorting Grapple: 587-8715