2134 mm (84 in)
Cat® Construction Fork Carriages for Small Wheel Loaders are wider than pallet fork carriages and are designed for heavy duty applications. Fork tines can be configured to allow tines to either swing or stay in a fixed position.
Height
43.1 in
Width
84 in
Tine Spacing Range - Outside Width
395-2034 mm (15.5-80.1 in)
Specification
Value
Height
43.1 in
Width
84 in
Tine Spacing Range - Outside Width
395-2034 mm (15.5-80.1 in)
Weight
1148.6 lb
Length
14.4 in
Interface Type
Fusion™ Coupler
This heavy duty carriage was specially designed to deliver performance at construction sites, moving palletized and large materials around. The high backs and good visibility through the frame make it happen.
In some operations, swinging forks helps to pick materials out of the ground. This carriage offers this option by just removing the lower bar and placing at the special storage located at the bottom of the carriage.
Adjust the fork position a total of 855 mm (33.7 in) from one side to the other with increments of 55 mm (2.2 in) and lock them to prevent non-expected movements.
Use the included red lever located at the right rear storage area to move your forks with safety and convenience.
All
Photos
Videos
360 View
