G3304B
Tough and durable, built on the industry-standard G3300 platform and equipped with technology that brings performance, uptime, and low operating cost to your operation. G3304B engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for G3304B engines include gas lift, gas gathering, and wellhead gas compression. Cat G3304B gas engine. Ratings: 71 bkW (95 bhp) @ 1800 rpm are NSPS site compliant capable with Caterpillar or customer-provided air-fuel ratio control and aftertreatment.
Maximum Rating
95.0 BHP
Emissions
NSPS 2010
Displacement
427.0 in³
Specification
Value
Maximum Rating
95.0 BHP
Emissions
NSPS 2010
Displacement
427.0 in³
Minimum Rating
95.0 BHP
Compression Ratio
10.5:1
Aspiration
Naturally Aspirated
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 1
Flywheel Teeth
156
Weight - Dry
2253.8 lb
Oil Change Interval
750
Ignition, Protection
ADEM™ A4
Air/Fuel Ratio Control
ADEM™ A4
Stroke
6.0 in
Bore
4.8 in
Specification
Value
Cooling System
4.23 gal (US)
Lube Oil System - Refill
8.19 gal (US)
The ADEM A4 system represents the next generation of engine management systems while reducing the number of mechanical components and easing troubleshooting. Features include: • Air/Fuel Ratio Control (AFRC) • Electronic ignition • Electronic governing/speed control • Start/stop logic • Engine protection & monitoring
Large variety of factory-installed engine attachments reduces packaging time
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Caterpillar parts and labor warranty. Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Catepillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
All
Photos
Videos
360 View
