COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Compact Wheel Loaders
908
ADD MODEL
ADD MODEL
Maximum Gross Power
75.1 HP
Na
Na
Engine Model
Cat C2.8*
Na
Na
Maximum Engine Speed
2550 rpm
Na
Na
Maximum Gross Power - Rated Engine Speed
2400 r/min
Na
Na
Maximum Gross Power - SAE J1995
75.1 HP
Na
Na
Maximum Gross Power - ISO 14396
74.3 HP
Na
Na
Maximum Gross Power - ISO 14396 (metric)
75.3 mhp
Na
Na
Rated Net Power - Rated Engine Speed
2400 r/min
Na
Na
Rated Net Power - SAE J1349
73 HP
Na
Na
Rated Net Power - ISO 9249
72.1 HP
Na
Na
Rated Net Power - 2,400 rpm - ISO 9249 (metric)
73.1 mhp
Na
Na
Maximum Gross Torque - SAE J1995
222 lb/ft
Na
Na
Maximum Gross Torque - ISO 14396
221 lb/ft
Na
Na
Maximum Net Torque - SAE J1349
218 lb/ft
Na
Na
Maximum Net Torque - ISO 9249
217 lb/ft
Na
Na
Displacement
171 in³
Na
Na
Bore
3.54 in
Na
Na
Stroke
4.33 in
Na
Na
Note
* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Na
Na
Note (1)
*Vary with bucket
Na
Na
Note (2)
**Vary with tire
Na
Na
Note (3)
^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Na
Na
Operating Weight
14617 lb
Na
Na
Bucket Capacities
0.75-1.55 m³ (1.0-2.0 yd³)
Na
Na
Bucket Capacities - General Purpose
0.80-1.35 m³ (1.0-1.7 yd³)
Na
Na
Bucket Capacities - Light Material
1.25-1.55 m³ (1.6-2.0 yd³)
Na
Na
Multi-Purpose
0.75-1.1 m³ (1.0-1.4 yd³)
Na
Na
Fuel Tank
24 Gal
Na
Na
Cooling System
3.2 Gal
Na
Na
Engine Crankcase
2.3 Gal
Na
Na
Axles - Front Center Differential
2.3 Gal
Na
Na
Axles - Rear Center Differential
2.3 Gal
Na
Na
Hydraulic System - Including Tank
18.6 Gal
Na
Na
Hydraulic Tank
11.8 Gal
Na
Na
Transmission
0.6 Gal
Na
Na
Front
Fixed (standard)
Na
Na
Rear
Fixed (standard)
Na
Na
Steering Articulation Angle - Each Direction
39 °
Na
Na
Maximum Flow - Steering Pump
12.3 gal/min
Na
Na
Maximum Working Pressure - Steering Pump
3336 psi
Na
Na
Steering Cycle Times – (full left to full right) – at High Idle
2.8 s
Na
Na
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.25 turns or 4.00 turns
Na
Na
Forward and Reverse - Speed Range Creep#
6 mile/h
Na
Na
Forward and Reverse - Speed Range 1*
6 mile/h
Na
Na
Forward and Reverse - Speed Range 2** - High Speed
11 mile/h
Na
Na
Forward and Reverse - Speed Range 2** - Standard
12 mile/h
Na
Na
Forward and Reverse - Speed Range 3***
25 mile/h
Na
Na
Tire Size - Standard
*405/70 R20 SPT9
Na
Na
Tire Size - Optional
405/70 R20 Powerloads
Na
Na
Tire Size - Optional (1)
400/70 R20 XMCL/Bibload
Na
Na
Tire Size - Optional (2)
360/80 R20 TRI 2
Na
Na
Tire Size - Optional (3)
40X14-20 TL, SM/TR
Na
Na
ROPS
ISO 3471:2008
Na
Na
FOPS
ISO 3449:2005 Level II
Na
Na
Note (4)
^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Na
Na
Main Relief - 1st Auxiliary (3rd slice)
3408 psi
Na
Na
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*
24 gal/min
Na
Na
Main Relief - 1st Auxiliary (3rd slice) - High Flow*
33 gal/min
Na
Na
Main Relief - 2nd Auxiliary (4th slice)
3408 psi
Na
Na
Main Relief - 2nd Auxiliary (4th slice) - Flow
12 gal/min
Na
Na
Hydraulic Cycle Time - Rackback
2.5 s
Na
Na
Hydraulic Cycle Time - Lift
5.8 s
Na
Na
Hydraulic Cycle Time - Dump
1.8 s
Na
Na
Hydraulic Cycle Time - Float Down
3.6 s
Na
Na
Height: Ground to Cab**
8.75 ft
Na
Na
Height: Ground to Beacon**
9.33 ft
Na
Na
Height: Ground Axle Center**
1.67 ft
Na
Na
Height: Ground Clearance**
1 ft
Na
Na
Length: Overall*
20.67 ft
Na
Na
Length: Rear Axle to Bumper
4.5 ft
Na
Na
Length: Hitch to Front Axle
3.5 ft
Na
Na
Length: Wheel Base
7.08 ft
Na
Na
Clearance: Bucket at 45° *
10.25 ft
Na
Na
Clearance: Load over Height**
14.08 ft
Na
Na
Clearance: Level Bucket**
12 ft
Na
Na
Height: Bucket Pin**
12.75 ft
Na
Na
Height: Overall**
16 ft
Na
Na
Reach: Bucket at 45° *
3.58 ft
Na
Na
Carry Height: Bucket Pin
1.67 ft
Na
Na
Dig Depth**
0.25 ft
Na
Na
Width: Bucket
6.75 ft
Na
Na
Width: Tread Center
5.08 ft
Na
Na
Turning Radius: Over Bucket
16.08 ft
Na
Na
Width: Over Tires
6.5 ft
Na
Na
Turning Radius: Outside of Tires
13.33 ft
Na
Na
Turning Radius: Inside of Tires
6.67 ft
Na
Na
Rack Angle at Full Lift
66°
Na
Na
Dump Angle at Full Lift
33°
Na
Na
Rack Angle at Carry
41°
Na
Na
Departure Angle - Degrees
30°
Na
Na
Articulation Angle - Degrees
39°
Na
Na
Operating Weight: Bucket ^
15124 lb
Na
Na
Tipping Load - Straight - ISO 14397-1 †
8262 lb
Na
Na
Tipping Load - Full Turn - ISO 14397-1 †
6888 lb
Na
Na
Operating Weight: Carriage and Tines ^^
15062 lb
Na
Na
Tipping Load - Straight †
6442 lb
Na
Na
80% of Tip: Firm and Level EN474-3 ††
4368 lb
Na
Na
Note (5)
†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Na
Na
Note (6)
††Full compliance to EN474-3 and SAE J1197.
Na
Na
Note (7)
#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Na
Na
Note (8)
Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Na
Na
Height - Ground to Cab
8.75 ft
Na
Na
Height - Ground Clearance
1 ft
Na
Na
Length - Overall with Bucket
18.67 ft
Na
Na
Length - Wheel Base
7.08 ft
Na
Na
Clearance - Bucket at 45°
8.17 ft
Na
Na
Clearance - Level Bucket
10.42 ft
Na
Na
Height - Bucket Pin
11.08 ft
Na
Na
Reach - Bucket at 45°
2.83 ft
Na
Na
Dig Depth
0.45 ft
Na
Na
Width - Bucket
6.75 ft
Na
Na
Width - Tread Center
5.08 ft
Na
Na
Turning Radius - Over Bucket
15.08 ft
Na
Na
Width - Over Tires
6.5 ft
Na
Na
Turning Radius - Inside Tire
6.67 ft
Na
Na
Tipping Load – Straight – ISO 14397-1 †
9581 lb
Na
Na
Tipping Load – Full Turn – ISO 14397-1 †
7985 lb
Na
Na