Jallad | Products

Engine Model

Cat C32B

Gross Power

907 HP

Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995

900 HP

Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249

814 HP

Emissions (Tier 2 Equivalent): Gross Power - SAE J1995

907 HP

Emissions (Tier 2 Equivalent): Net Power ISO - 9249

823 HP

Rated Speed

1750 r/min

Bore

5.7 in

Stroke

6.4 in

Displacement

1958 in²

Peak Torque - 1,200 rpm

3139 lb/ft

Torque Rise

30 %

Note (1)

- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfer or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf

Note (2)

Net torque rise meets SAE J139.

Note (3)

No engine derating required up to 3050 m (10,000 ft) altitude.

Operating Weight

224647 lb

Transmission Type

Cat Planetary Power Shift

Converter Drive - Forward 1

4.4 mile/h

Converter Drive - Forward 2

7.7 mile/h

Converter Drive - Forward 3

13.2 mile/h

Converter Drive - Reverse 1

4.8 mile/h

Converter Drive - Reverse 2

8.4 mile/h

Converter Drive - Reverse 3

14.6 mile/h

Direct Drive - Forward 1

Lock-up disabled

Direct Drive - Forward 2

8.1 mile/h

Direct Drive - Forward 3

14.2 mile/h

Direct Drive - Reverse 1

5 mile/h

Direct Drive - Reverse 2

8.9 mile/h

Direct Drive - Reverse 3

15.6 mile/h

Note

Travel speeds based on 45/65-45 L-5 46 ply tires.

Output at 1,850 rpm and 6900 kPa (1,000 psi)

161 gal/min

Cylinders, Double Acting - Lift, Bore and Stroke

177 mm × 1760 mm (0.58 ft × 5.8 ft)

Cylinder, Double Acting - Tilt and Tip, Bore and Stroke

267 mm × 286 mm (0.88 ft × 0.94 ft)

Fuel Tank - Standard

413 gal (US)

Cooling System

53 gal (US)

Crankcase

32 gal (US)

Transmission

45 gal (US)

Differential - Final Drives - Front

98 gal (US)

Differential - Final Drives - Rear

90 gal (US)

Hydraulic System - Steering and Engine Cooling Fan - Tank Only

77 gal (US)

Front

Fixed

Rear

Trunnion

Brakes

Meets ISO 3540:2011

Blade Capacities

30.5 to 44.8 m3 (40 to 58.6 yd3)

Height - Top of ROPS

18.25 ft

Height - Top of Exhaust Pipe

17.17 ft

Height - Top of Hood

13 ft

Ground Clearance

27 in

Centerline of Front Axle to Hitch

9.67 ft

Centerline of Rear Axle to Edge of Bumper

13.75 ft

Wheel Base

19.25 ft

Length - With Blade on Ground

44 ft

Steering System - Pump

Piston, variable displacement

Minimum Turning Radius - Over Blade

31 ft

Steering System - Circuit

Pilot, load sensing

Total Steering Angle

86 degrees

Relief Valve Setting

5004 psi

Sound Performance

• The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

ROPS/FOPS

ISO 3471:2008 and ISO 3449:2005 Level II Standards

Engine

Weights

Transmission

Hydraulic System - Lift/Tilt

Service Refill Capacities

Axles

Brakes

Blades

Dimensions (Approximate)

Hydraulic System - Steering

Sound Performance Levels

Air Conditioning System

Cab