COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Compact Track Loaders
289D3
ADD MODEL
ADD MODEL
Gross Power - SAE J1995
74.3 HP
Na
Na
Net Power - SAE 1349
72.1 HP
Na
Na
Displacement
203 in³
Na
Na
Bore
3.7 in
Na
Na
Stroke
4.7 in
Na
Na
Net Power - ISO 9249
72.8 HP
Na
Na
Engine Model
Cat C3.3B DIT (turbo)
Na
Na
Peak Torque - 1,600 rpm - SAE J1995
195 ft·lbf
Na
Na
Net Power
72.1 HP
Na
Na
Net Power SAE 1349†
72.7 HP
Na
Na
Net Power ISO 9249†
73.5 HP
Na
Na
Emissions
†Engine meeting Brazil MAR-1 and China Nonroad Stage III emission standards emits equivalent to U.S. EPA Tier 4 Interim and is offered only for Australia/New Zealand, Brazil, China, French Polynesia, Hong Kong, Macedonia and New Caledonia.
Na
Na
Rated Operating Capacities - 35% Tipping Load
2890 lb
Na
Na
Tipping Load
8255 lb
Na
Na
Breakout Force - Tilt Cylinder
7291 lb
Na
Na
Rated Operating Capacity with Optional Counterweight
4370 lb
Na
Na
Ground Pressure - With 450 mm/17.7 in Track
4.7 psi
Na
Na
Rated Operating Capacities - 50% Tipping Load
4130 lb
Na
Na
Ground Contact Area - With 450 mm/17.7 in Track
2272 in²
Na
Na
Operating Weight
10688 lb
Na
Na
Length - Track on Ground
64.2 in
Na
Na
Overall Length - Track
83.8 in
Na
Na
Height - Top of Cab
83.2 in
Na
Na
Ground Clearance
8.9 in
Na
Na
Departure Angle
33°
Na
Na
Maximum Dump Angle
51°
Na
Na
Clearance at Maximum Lift and Dump
94 in
Na
Na
Reach - Maximum Lift/Dump
30 in
Na
Na
Bucket Pin Height - Carry Position
7.5 in
Na
Na
Length - Without Bucket
117.9 in
Na
Na
Maximum Reach - With Arms Parallel to Ground
50 in
Na
Na
Length - With Bucket on Ground
146.2 in
Na
Na
Bucket Pin Height - Maximum Lift
125.1 in
Na
Na
Bucket Pin Reach - Maximum Lift
14.5 in
Na
Na
Maximum Overall Height
158.1 in
Na
Na
Turning Radius from Center - Machine Rear
70.7 in
Na
Na
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 2036 mm (80 in) low profile bucket, 450 mm (17.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Na
Na
Turning Radius from Center - Coupler
55.5 in
Na
Na
Rack Back Angle - Maximum Height
84°
Na
Na
Turning Radius from Center - Bucket
88.8 in
Na
Na
Vehicle Width (450 mm/17.7 in tracks)
78 in
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Na
Na
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
4061 psi
Na
Na
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
32 gal/min
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Flow
23 psi
Na
Na
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
76 HP
Na
Na
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
44 HP
Na
Na
ROPS
ISO 3471:2008
Na
Na
FOPS
ISO 3449:2005 Level I
Na
Na
Travel Speed - Forward or Reverse - One Speed
4.5 mile/h
Na
Na
Travel Speed - Forward or Reverse - Two Speed
8.3 mile/h
Na
Na
Cooling System
3.7 gal (US)
Na
Na
Engine Crankcase
3 gal (US)
Na
Na
Fuel Tank
27.7 gal (US)
Na
Na
Hydraulic System
13.7 gal (US)
Na
Na
Hydraulic Tank
10.3 gal (US)
Na
Na
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Na
Na
Note (1)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Na
Na
Inside Cab**
83 dB(A)
Na
Na
Outside Cab***
103 dB(A)
Na
Na
Note (2)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Na
Na