Jallad | Products

Gross Power - SAE J1995:2014

2,100 HP

Engine Model

Cat® 3516E

Net Power - SAE J1349:2011

1,975 HP

Rated Speed

1,650 r/min

Emissions Rating

Fuel Optimized

Bore

6.7 in

Stroke

8.5 in

Displacement

4,766 in³

Note (1)

Consult your local Cat dealer for body recommendations

Note (2)

Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities.

Note (3)

U.S. EPA Tier 4 Final / EU Stage V optional engine available for applicable markets.

Rated Gross Machine Weight

715,000 lb

Body Weight

60,406 lb

Nominal Rated Payload

213 ton (US)

Front Axle - Empty

50%

Rear Axle - Loaded

67%

Rear Axle - Empty

50%

Front Axle - Loaded

33%

Planetary Ratio

10.83:1

Total Reduction Ratio

25.46:1

Type

Self-contained nitrogen/oil cylinders, pin-to-pin mounting, top and bottom double shear clevis attachments

Differential Ratio

2.35:1

Forward - 1

7.8 mile/h

Forward - 2

10.6 mile/h

Forward - 3

14.4 mile/h

Forward - 4

19.4 mile/h

Forward - 5

26.3 mile/h

Forward - 6

35.5 mile/h

Reverse

7.3 mile/h

Top Speed - Loaded

35.5 mile/h

Standard Tires

37 R57

Optional Tires

40 R57

Optional Tire

42/90 R57

Rims

29” x 57” Rims

Service Brakes

Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated

Front Wet Disc Brake Surface Area

12,662 in²

Rear - Wet Disc Brake Surface Area

20,861 in²

Standards

(Service and Secondary) ISO 3450:2011

Parking Brake

Four-corner, Multi-disc, Spring applied, Hydraulically Released

Struck

77 m3(101 yd3)

Heaped (SAE 2:1)*

143 m3(187 yd2)

Pump Flow - High Idle

106.5 gal/min

Relief Valve Setting - Raise

2,749 psi

Body Raise Time - High Idle

14 s

Body Lower Time - Float

16 s

Effective Cylinder Stroke - Front

4.12 in

Effective Cylinder Stroke - Rear

3.67 in

Rear axle - Oscillation

+/- 5 degrees

Fuel Tank - Standard

550 gal (US)

Fuel Tank

1000 gal (US)

Fuel Tank (Tier 4)

55 gal (US)

Diesel Exhaust Fluid Tank

62 gal (US)

Cooling System

180 gal (US)

Crankcase

77 gal (US)

Front Wheels - Each

5.8 gal (US)

Differentials

161 gal (US)

Steering System

42 gal (US)

Steering System - Includes Tank

46 gal (US)

Brake Hoist System

169 gal (US)

Brake Hoist System - Includes Tank

347 gal (US)

Torque Converter - Transmission System - Including Sump

55 gal (US)

Air Conditioning

(HFC - 134A refrigerant) 24,500 Btu/hr

Heater / Defroster

33,300 Btu/h

ROPS Standards (1)

The operator sound pressure level, 77 dB(A) with direct drive and 75 dB(A) with optional clutch, tested to ISO 6396:2008.

ROPS Standards (2)

ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.

FOPS Standards

FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II for Operator and ISO 13459:2012 Level II for Trainer.

Steer Angle

36.07 °

Steering Standards

ISO 5010:2007

Height - Top of ROPS

5550 mm

Overall Body Length

12945 mm

Inside Body Length

8730 mm

Overall Length

12970 mm

Wheel Base

57000 mm

Rear Axle - Tail

3856 mm

Ground Clearance

1304 mm

Dump Clearance

1585 mm

Loading Height - Empty

6147 mm

Rear Sidewall Height

1010 mm

Inside Body Depth - Maximum

3075 mm

Overall Height - Body Raised

11534 mm

Operating Width

7822 mm

Centerline Front Tire Width

5410 mm

Engine Guard Clearance

1290 mm

Overall Canopy Width

7769 mm

Outside Body Width

7123 mm

Inside Body Width

6920 mm

Front Canopy Height

6739 mm

Rear Axle - Clearance

1263 mm

Centerline of Rear Dual Tire Width

4695 mm

Overall Tire Width

7120 mm

Engine

Weights - Approximate

Weight Distributions - Approximate

Final Drives

Transmission

Tires

Braking System

Capacity - HP Body - 100% Fill Factor

Body Hoists

Suspension

Service Refill Capacities

Cab

Steering

Dimensions (Approximate)