COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Three Axle Articulated Trucks
745
ADD MODEL
ADD MODEL
Engine Model
Cat® C18
Na
Na
Bore
5.7 in
Na
Na
Stroke
7.2 in
Na
Na
Displacement
1106 in³
Na
Na
Net Power - ISO 14396
504 HP
Na
Na
Engine Model - Equivalent to U.S. EPA Tier 2 and EU Stage II
Cat C18
Na
Na
Gross Power - SAE J1995
511 HP
Na
Na
Net Power - SAE J1349
496 HP
Na
Na
Peak Engine Torque Net (SAE J1349)
1887 ft·lbf
Na
Na
No Engine De-rating Required Below
10000 ft
Na
Na
Note (3)
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Na
Na
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Na
Na
Emissions
Equivalent to Tier 2/Stage II.
Na
Na
Peak Engine Torque Gross (SAE J1995)
1931 ft·lbf
Na
Na
Peak Engine Torque Speed
1200 r/min
Na
Na
Rated Payload
45.2 ton (US)
Na
Na
Heaped (SAE 2:1)
32.7 yd³
Na
Na
Struck
24.2 yd³
Na
Na
Tailgate Heaped SAE 2:1
34.7 yd³
Na
Na
Tailgate Struck
25.5 yd³
Na
Na
Forward - 1
3.8 mile/h
Na
Na
Forward - 2
5 mile/h
Na
Na
Forward - 3
7 mile/h
Na
Na
Forward - 4
8.8 mile/h
Na
Na
Forward - 5
11.6 mile/h
Na
Na
Forward - 6
14.2 mile/h
Na
Na
Forward - 7
19.6 mile/h
Na
Na
Reverse - 1
4 mile/h
Na
Na
Reverse - 2
9.1 mile/h
Na
Na
Forward - 8
23.5 mile/h
Na
Na
Forward - 9
34 mile/h
Na
Na
Interior Cab
72 dB(A)
Na
Na
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Na
Na
Center Axle - Rated Load
38691 lb
Na
Na
Rear Axle - Loaded
53594 lb
Na
Na
Total - Loaded
163016 lb
Na
Na
Front Axle - Rated Load
13007 lb
Na
Na
Total - Empty
72627 lb
Na
Na
Front Axle - Loaded
55250 lb
Na
Na
Center Axle - Loaded
54172 lb
Na
Na
Rear Axle - Empty
14903 lb
Na
Na
Rear Axle - Rated Load
38691 lb
Na
Na
Center Axle - Empty
15481 lb
Na
Na
Total - Rated Load
90390 lb
Na
Na
Front Axle - Empty
42243 lb
Na
Na
Type
High Strength Brinell HB450 Wear Resistant Steel
Na
Na
Chute
0.55 in
Na
Na
Base
0.55 in
Na
Na
Front
0.28 in
Na
Na
Side
0.43 in
Na
Na
Fuel Tank
145.3 gal (US)
Na
Na
Cooling System
23.7 gal (US)
Na
Na
Engine Crankcase
13.7 gal (US)
Na
Na
Steering/Hoist Hydraulic System
36.9 gal (US)
Na
Na
Transmission - OTG
19.8 gal (US)
Na
Na
DEF Tank
5.3 gal (US)
Na
Na
Brake Cooling Tank
17.69 gal (US)
Na
Na
Final Drive - Each
1.3 gal (US)
Na
Na
Axles - Each
15.8 gal (US)
Na
Na
Raise (automatic)
13 s
Na
Na
Raise (manual)
12 s
Na
Na
Lower (manual)
10 s
Na
Na
Lower (automatic)
10 s
Na
Na
Lock to Lock
4.8 seconds @ 60 rpm
Na
Na
Brakes
ISO 3450 – 2011
Na
Na
Cab - FOPS
ISO 3449 Level II
Na
Na
Cab - ROPS
ISO 3471 – 2008
Na
Na
Steering
ISO 5010 – 2007
Na
Na
Turning Dimensions - Clearance Radius
356 in
Na
Na
Turning Dimensions - Inside Radius
174 in
Na
Na
Turning Dimensions - Aisle Width
233 in
Na
Na
Turning Dimensions - SAE Turning Radius
340 in
Na
Na
Note
An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Na
Na
Turning Dimensions - Steer Angle - Left/Right
45°
Na
Na
Hydraulic Excavator: 390 - Passes
4
Na
Na
Wheel Loader: 980 - Passes
43926
Na
Na
Wheel Loader: 982 - Passes
4
Na
Na
Wheel Loader: 972 - Passes
43926
Na
Na
Hydraulic Excavator: 374 - Passes
5
Na
Na