Maximum Gross Power: Maximum Engine Speed
Rated Net Power: SAE J1349
Maximum Gross Power: ISO 14396 (DIN)
Maximum Gross Power: ISO 14396
Rated Net Power: Rated Engine Speed
Maximum Gross Power: SAE J1995
Rated Net Power: ISO 9249
Rated Net Power: ISO 9249 (DIN)
Maximum Gross Torque: SAE J1995
Maximum Gross Torque: ISO 14396
Maximum Net Torque: SAE J1349
Maximum Net Torque: ISO 9249
Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power
Steering Articulation Angle (each direction)
Maximum Flow – Steering Pump
Maximum Working Pressure – Steering Pump
Steering Cycle Times (full left to full right): At 2,350 RPM: 90 RPM steering wheel speed
Number of Steering Wheel Turns – full left to full right or full right to full left
Maximum Flow – Implement Pump
Maximum Flow – Implement Pump: 3rd Function, Maximum Flow, Standard
Maximum Flow – Implement Pump: 3rd Function, Maximum Flow, High
Maximum Flow – Implement Pump: 4th Function, Maximum Flow
Maximum Working Pressure – Implement Pump
Relief Pressure – Tilt Cylinder
Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure
Relief Pressure – Tilt Cylinder: 4th Function Maximum Working Pressure
Hydraulic Cycle Times: Raise (ground level to maximum lift)
Hydraulic Cycle Times: Dump (at maximum reach)
Hydraulic Cycle Times: Rack Back
Hydraulic Cycle Times: Float Down (maximum lift to ground level)
Hydraulic Cycle Times: Total Cycle Time
Forward and Reverse: Low Range, Speed Range 1*
Forward and Reverse: Low Range, Speed Range 2*
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Other Choices Include:
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport™
Other tire choices are available. Contact your Cat dealer for details.
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
ISO 3449:2005 Level II
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
*The measurements were conducted with the cab doors and windows closed.